Overview
Everything you need to master Posify — selling at the till, sales and customers, the catalogue, stock and buying, the books, loyalty and gift cards, marketing, reports, staff and settings. Pick a chapter below or jump straight in.
Signing in
Posify runs in the browser on any computer, tablet or phone. Everyone who works for the business signs in with their own email and password, and lands where their role opens: the dashboard, or straight on the till.
Read chapterFinding your way
Every page wears the same frame: the sidebar on the left, a header across the top, and the page between them. Both follow your role's permissions, so your menu may be shorter than a colleague's.
Read chapterDashboard
The dashboard is the first page after signing in for most roles. Its layout follows the job — the owner's overview, the till, stock, buying or money — and each figure on it appears only when your permissions cover it.
Read chapterThe till
POS opens the till: the products on one side and the current sale on the other, in any modern browser on a desktop, tablet or phone. What the till lets you do follows the permissions of whoever is working it at that moment.
Read chapterPosify runs in the browser on any computer, tablet or phone. Everyone who works for the business signs in with their own email and password, and lands where their role opens: the dashboard, or straight on the till.
- 1
Sign in
Open your business's Posify address. The Welcome back screen asks for your Email and Password; press Sign in. You land on the dashboard, or on the till when your role's Opens on sign-in is set to POS (the till).
- 2
Enter your two-step code
With two-step verification on, the Two-Factor Authentication screen asks for the Verification code from your authenticator app. Tick Trust this device for 30 days to skip it on this device. Lost your phone? Use a backup code takes one of the backup codes you saved; each works once.
- 3
Set up two-step when your role requires it
A role can require two-step verification. Until you set it up you are sent to Set up two-step verification and can do nothing else: type your password, scan the QR code with an authenticator app such as Google Authenticator or Authy, enter the 6-digit code and keep the backup codes somewhere safe.
- 4
Reset a forgotten password
Forgot password? under the password box emails a reset link when email is set up for the business. If Settings → Security & Access Control switches on Password reset by text message, it can also text a 6-digit code, valid for 10 minutes, to a mobile number you verified on your profile. With neither available, ask your owner or a manager to reset it from your staff page.
- 5
Accept an invitation
A new colleague either gets an emailed invitation, whose link lets them set their own password and works for 7 days, or is handed a first password in person. Either way, they can change it later from their profile.
- 6
Look after your profile
Your account menu → Profile holds your name and photo, Change password, Two-Factor Authentication, your Register PIN if you work the till, the mobile number your text alerts go to with Verify for password recovery, and Sign Out of All Other Sessions.
Wrong passwords lock the account
After the number of failed tries set in Settings → Security & Access Control, the account is locked for a while and the sign-in screen says for how long. Someone who may change those settings can lift the lock at once with Unlock an account.
Your role may limit when you sign in
A role can limit sign-in to set hours, and a person can be given an access end date. Outside those hours the sign-in screen turns you away; a manager can let someone in for a one-off late shift with Allow sign-in now on their staff page.
The owner's way back in
If the owner loses both the password and the authenticator app, the account is restored on the server by whoever runs it. The Documentation covers the steps.
The dashboard is the first page after signing in for most roles. Its layout follows the job — the owner's overview, the till, stock, buying or money — and each figure on it appears only when your permissions cover it.
Laid out by role
A role's Dashboard setting picks the layout: Automatic, Overview (owner, manager), Till, Stock, Buying or Money. Automatic reads it from the role's permissions, and someone whose work spans two jobs gets the second job's figures below their own.
The owner's overview
Six figures for the period — Net Sales, Orders, Profit, Avg. Order Value, Customers and Returns — each compared with the period before, then the Sales Overview chart, which can show In-store or Back office sales on their own.
Branches, hours and best sellers
Branch Performance compares your branches, Busy Hours shows when sales come in over recent days, and Top Products, Category Mix and a running-low list show what sells and what needs ordering.
Money at a glance
With access to the books, the Financial Summary shows the Cash & Bank Balance, the month so far and Bills & Payables, and Recent Transactions lists the latest sales, returns and voids.
The till dashboard
A cashier sees their shift — Open a shift, Resume selling or Close shift — My targets for today, this week and this month, My recent sales, Needs attention, and Quick actions such as New sale, Return or reprint, Take a due payment and Find a sale.
Stock, buying and money
The stock layout counts low, out-of-stock, incoming and expiring items, then lists the stock work waiting and what is running low. Buying shows open and late orders and what is owed to suppliers; money shows cash and bank, what customers owe, the month's profit, bills to pay and the state of the books.
Pick the period and the branch
The period picker offers Today, Yesterday, Last 7 days, This month, All time and Custom range, and a branch picker appears when you work at more than one. Today means the business's day, in the time zone set in Settings → General Settings.
The overview keeps itself current
While its tab is on screen, the overview reads its figures again every minute. The Store is Open pill shows the drawers that are open and your own shift, and turns amber while a drawer of yours from an earlier day is still open.
Figures lead to the detail
The six figures open the report behind them, and View all on a list opens the full page, so the dashboard is a starting point rather than a dead end.
POS opens the till: the products on one side and the current sale on the other, in any modern browser on a desktop, tablet or phone. What the till lets you do follows the permissions of whoever is working it at that moment.
- 1
Open the till and pick your register
Choose POS in the sidebar or the till icon in the header; it needs the Use the POS permission. The first time on a device it asks Which register are you at?: the sales, drawer and held sales on that device follow your choice, and the register's name at the top of the till switches it later.
- 2
Open your shift
With no drawer open, the till asks you to Open your shift: count the cash in the drawer, or use Count by notes and coins, and press Start shift. Where Settings → Point of sale does not require an open drawer, Sell without a shift is offered too, but cash taken that way goes into no drawer and no count checks it.
- 3
Find the product
Type in Search products by name, SKU or barcode… (press / to jump there), tap a category in the strip, or open Favourites for the quick keys a manager starred. A barcode scanner works from anywhere on the page, Scan a barcode… (F8) takes a code typed by hand, and Scan with camera uses the device's camera.
- 4
Work the cart lines
Tap a product to add it; one with variants asks you to Select a variant first. On each line use minus and plus, or tap the quantity to type it, then Change price if your role may, add a Line discount or a Line note that prints on the receipt, or remove the line.
- 5
Attach a customer (F2)
Add customer offers Walk-in Customer, a search of existing customers by name, phone or email, or Create New with a name and an email or phone. The cart then shows what they owe, their group's price and whether they are tax exempt.
- 6
Discount the whole sale (F3)
Sale discount takes Percent off or Amount off, a Reason (Loyal customer, Damaged goods, Staff purchase, Price match, Promotion or Other) and an optional note, and shows the new total. Above your role's limit, a manager approves it with their PIN when you take payment.
- 7
Apply a coupon
When coupons are switched on in Settings → Marketing, Apply coupon takes a code off the whole sale, after the lines' own discounts. Choose the customer first when the coupon is for some customers only or has a limit per customer. A coupon needs a connection, and a sale with a coupon cannot also take a typed sale discount (line discounts still work). See the Marketing chapter.
- 8
Sell tax-free when asked
Tap the Tax line under the cart to open Tax-exempt sale: give a reason and, if there is one, the Exemption certificate number, then Sell tax-free. The reason is kept on the sale and printed on the receipt; a customer marked tax exempt is tax-free without asking.
- 9
Hold the sale and serve the next customer (F4)
Hold parks the cart under an optional label. With the cart empty the same button reads Resume and lists the Held sales; resuming one re-checks prices and stock and tells you what changed.
Held sales stay on this device
A held sale is kept in this browser for this register, so another device never sees it and clearing the browser's data loses it. A register holds up to 50 at a time.
Pick the layout that suits your counter
Layout offers Beam (cart on the right), Lane (cart on the left) and Counter (categories, product list and cart), and Full screen hides the browser around the till. On a phone the till splits into Products, Cart and Held tabs.
Out of stock here?
An item this branch has run out of shows which other branches hold it, and Request asks one of them to send it as a transfer. Whether the till sells past zero is set in Settings → Point of sale → Selling past zero stock and on the product itself.
Checkout (F9) opens Take payment with the ways to pay that Settings → Payments switches on. A sale can be paid one way or split across several, part-paid as a deposit, or partly left on the customer's account.
- 1
Open Take payment
Press Checkout or F9. The dialog shows the Total due and the ways to pay that are on: Cash, Card, Bank transfer, Other and Gift card, plus Store credit and Loyalty points once a customer is attached.
- 2
Take cash
Choose Cash and type the Cash given, or tap a quick amount: the exact total and the next notes above it. Change due shows as you type, and when Settings → Payments sets cash rounding, the dialog says what the total was rounded to. Accept cash completes the sale.
- 3
Take a card, a transfer or another payment
Card waits while the customer taps or inserts on your own card reader; record it with an optional reference such as the authorisation code. Bank transfer takes a reference too, and Other covers any other way the money came in.
- 4
Split it across methods
Type less than what is left and the button becomes Add Cash payment of …: that payment joins the list and Left to pay shows the rest. Pick the next method for the remainder, then Complete sale.
- 5
Take a deposit
With a customer attached and Allow deposits on in Settings → Payments, pay part and choose Take … as a deposit, … due later. The goods are set aside, and the balance is collected later from the till's Sales list with Collect balance.
- 6
Leave the rest on account
For a customer with a credit limit, a button offers to put what is unpaid on the customer's account, within what is left of their limit. It needs the Sell on account permission and On account switched on in Settings → Payments.
- 7
Spend points, store credit or a gift card
Loyalty points shows the customer's points, Points to spend and a Use … button for the most they may spend. Store credit spends their credit balance, and Gift card takes a typed or scanned code, Check, and the card's PIN when it has one. All three need a connection.
- 8
Hand over the receipt
Sale complete shows the number, total and items with Print receipt, View receipt and New sale, plus Email receipt and Text receipt when Settings → Point of sale → Sending receipts offers them. With Print a receipt after every sale on, the receipt prints by itself.
Past your limit, a colleague approves
When a sale needs a permission you lack, or goes past your role's till limits, Ask a manager lets a colleague who may approve pick their name and type their register PIN on your screen. Their approval is written on the sale and in the activity log.
No answer from the server
If the connection drops at the moment of payment, the till checks whether the sale went through. Keep the customer at the counter and take no second payment until it says the sale was not taken or completes it: the same sale is never taken twice.
Card readers and scales stay separate
Posify 1.0 does not drive card terminals, customer displays or scales. Take the card on your own reader and record it as Card; to sell by weight, give the product a unit with decimals and type the weight as the quantity.
Each register keeps a drawer session: it opens with a counted float, records every cash movement, and closes with a count against what the drawer should hold. The X report shows the session so far; the Z report is its closing record.
- 1
Open the drawer
The Drawer closed button in the cart's header opens Cash drawer: count the cash before the first sale and enter it as the Opening float. The till shows what the last shift left, and a different figure, or one above Settings → Point of sale → Largest float, needs a note saying why. Print opening slip prints the count.
- 2
Move cash without a sale
Cash in records cash put into the drawer, such as change from the safe; Cash out records cash taken out, such as a drop to the safe or a paid-out expense; No sale opens the drawer for change or a check. Each asks for a reason, and a cash out above your limit needs a manager's PIN.
- 3
Check the X report
While the drawer is open, the dialog shows the session so far: opening float, sales, cash sales, cash in, cash out, cash refunds and Expected in drawer. Print X report prints it at any time without closing anything.
- 4
Count and close
Close drawer asks for the Counted cash, as one figure or with Count by notes and coins, and a count for each other way of paying. The difference shows as Over, Short or Balanced; add a Closing note and split the cash between Leave in the drawer, which becomes the next float, and To the safe or bank.
- 5
Get an off count approved
When the count is off by more than Settings → Point of sale → Count difference needing approval, closing needs a note and the PIN of someone with the Approve a drawer count that is off permission. An approval can also be given later on the session's page.
- 6
Print the Z report and hand over
Once the drawer is closed, Print Z report prints its closing record, with each cashier's sales in that drawer. Hand over to the next cashier passes the till on: they type their PIN and open their own shift.
- 7
Switch cashier without signing out
The Cashier button at the top of the cart lets a colleague Take over the POS with their register PIN, and Back to … hands it back. With Lock the POS when idle set, the till locks after that many minutes until someone picks their name and types their PIN.
- 8
Review sessions in the back office
Sales → Register sessions lists every drawer with filters for when it opened, who opened and closed it and how the count came out, plus Export. Each session shows its X report (so far) or Z report, its cash events and the count for each way of paying against what was expected.
A drawer left open from an earlier day
The till warns This drawer is still open and offers Carry on in it or Count and close: close it before the day's sales so the next Z report starts clean. Settings → Notifications → Registers closed by alerts the branch's managers about registers still open after that time.
Blind close
With Blind close on in Settings → Point of sale, cashiers count without seeing what the drawer should hold, and cannot print the X report mid-shift; the difference shows once the drawer is closed. Roles with See the expected cash when closing a drawer still see it.
Cash in and out wait in Cash in transit
Cash put in or taken out passes through Cash in transit in the books until someone says where the money went. Bank it under Money in and out → Cash and bank, or clear it with a transfer or an expense paid from Cash in transit.
When the shop's connection drops, the till keeps selling. Each sale is saved on the device with a provisional receipt number and sent to the server by itself once the connection is back.
- 1
Get each device ready
Open the till on every device while online and signed in, and let it load its products: a device that never reached the server cannot sell offline. If a device scans with its camera, open the camera scanner once while online too. Use the business's usual https address, as browsers allow offline selling only on a secure one.
- 2
Know what works offline
Selling, scanning, quantities, line notes, discounts and tax exemption; Cash, Card, Bank transfer and Other; holding sales; opening the drawer, cash in, cash out, no sale and closing; finding customers the till has downloaded, adding a new one, and printing receipts.
- 3
Know what waits for the connection
Returns, voids and finding an earlier sale; paying with loyalty points, store credit or a gift card; selling or reloading a gift card and checking its balance; Receive due; the idle lock and switching cashier with a PIN; and every page outside the till.
- 4
Read the banner
Offline — sales are being queued tells you the till is working from its own copy, and Stock shown is from … says how old the stock figures are. Back online, the banner counts the sales waiting to sync and offers Sync now.
- 5
Watch the offline window
Settings → Point of sale → Offline selling window sets how long a register keeps selling without reaching the server: 1 to 72 hours, 12 by default. After that the till shows Reconnect to keep selling until it can sign in again; nothing already taken is lost.
- 6
Let it sync
Queued items go one at a time, in the order they were taken. Prices and tax are worked out again as each sale arrives, the sale keeps its own time and cashier, and it follows the same rules as a sale rung up online: role limits and approvals, the till's selling-below-zero setting, the open drawer and the branch's product list. A sale that breaks one, such as stock another till sold meanwhile, is refused and goes to review. The server counts a sale as offline only when it carries the pass the till was handed while online, and the sale is dated inside the offline window.
- 7
Fix a sale the server refuses
A refused sale is never dropped: it waits under Review on the banner of the device that took it, with Server said: and the reason. Fix the cause (for example, add the stock) in the back office and press Send again; Discard only once the sale is recorded another way. People who may edit sales get An offline sale needs review in the bell.
Never clear a till's browser data
Queued sales exist only on that device until they sync. Do not clear site data, use a private window or a clean-on-exit setting on a till. Signing out clears the till's offline copy but never the queue.
How much a till holds
A register keeps up to 500 unsynced sales before it asks to reconnect. Its offline copy holds up to 20,000 products and the 500 most recently changed active customers, refreshed every 15 minutes while online.
Leave prices alone during an outage
A queued sale is priced again when it arrives, so a price or tax changed in the meantime, or stock another till sold, can stop the payments matching and send the sale to review.
Sales holds every sale, whether it was rung up at a till or typed in from the back office. Open any one to see its lines, payments and tax, print it again, or void it when it was a mistake.
- 1
Find a sale
Sales → All sales lists the sales at your branches. Search by number, receipt number, customer or phone, switch to Owing for sales with money still due, and narrow by date, payment, what it was paid with, register, cashier, customer, total, branch and channel (POS or Back office). Export downloads what the filters show.
- 2
Open it
A sale shows its details, its lines with any line discounts and batches, every payment with the change given, and the totals: subtotal, discount, tax, rounding, returned and any balance due. A sale taken offline also shows its offline receipt number and when it synced.
- 3
Print it again
Print prints the sale page. When Settings → Invoice templates has a default design for the A4 sale invoice, the button becomes Print invoice and the plain page print moves into the menu beside it. At the till, the Sales button reprints receipts and can email or text them.
- 4
Type in a sale from the back office
New sale opens an invoice that is priced, taxed and stocked exactly like a till sale; it needs the Create sales permission. Choose the Branch, a Customer or none for a walk-in, add lines from the branch's products and the payments, say what is left — nothing, on the customer's account or a deposit — and Save sale.
- 5
Void a sale
Void, with a reason, puts the stock back on the shelf and reverses the money; it needs the Edit sales permission and cannot be undone. A sale that already has returns cannot be voided.
- 6
Read the till's own report
Sales → Sales History sums up the counters: sales by cashier, register and branch, money taken by each way of paying, drawer sessions, and trends by day and hour, with Export CSV. Someone with only Their own sales history sees their own sales, money and drawers.
Voiding a cash sale whose drawer is open
A till sale's cash sits in its drawer. While that drawer is still open, void the sale at the POS in that session; once it is closed, the back office asks which open drawer at the sale's branch pays the cash back out.
Paid by a receipt? Reverse that first
A credit sale that a customer receipt has paid cannot be voided. Reverse the receipt under Money in and out → Customer receipts first, or take the goods back as a return.
Gift cards sell at the till only
A back-office invoice refuses a gift card line, so sell and reload cards at the POS.
Goods come back at the till, against the sale they were bought on. A return refunds by the method you choose — store credit and an exchange toward new goods included — and puts sellable items back into the counter's stock.
- 1
Find the original sale
On the till, open Sales and search by receipt number or phone number; a scanner types the receipt's barcode into the search box. Pick the sale to see its items and payments.
- 2
Choose what comes back
Return items lists each line with how many can still come back. Set the quantity with One more and One fewer, mark each Back on the shelf or Damaged, pick a Reason (Changed their mind, Not as described, Wrong item, Damaged or faulty, Other) and add a note, which Other requires.
- 3
Choose the refund
Refund to offers Cash from the drawer, Card, by hand, Bank transfer, Store credit for a sale with a customer, Exchange and Other. The dialog shows how much comes off a balance still owed first, and what goes back to the points, store credit or gift card the sale was paid with.
- 4
Take the return
Take return records it and tells you what to hand over, such as Give the customer … from the drawer. Print return slip prints the slip, with how the refund was split.
- 5
Run an exchange
Refund as Exchange and the till shows the exchange credit above the cart: ring up the new goods and the credit pays toward them. If the customer changes their mind, Drop the exchange credit and give the amount in cash from the drawer.
- 6
Void a sale at the till
In the till's Sales list, Void cancels the whole sale: its stock goes back and its money is reversed. It needs the Void a sale permission, or a manager's PIN, and cannot be undone.
- 7
Review returns in the back office
Sales → Returns lists every return with filters for reason, condition, refund method, exchange status, cashier and amount, plus Export. Exchange credit not spent lists exchanges never used up, to settle with Give as store credit or Pay out in cash.
Returns need a connection and a returns counter
Returns are taken online only, at a branch with Take returns here on in Settings → Branches, by someone with the Take returns permission. A refund above your role's Most refund per return needs a colleague's PIN.
Damaged items stay off the shelf
Items marked Back on the shelf return to the counter's stock; damaged ones do not, so they never show as sellable.
Points and gift card money never come back as cash
What the sale paid with points, store credit or a gift card goes back there first. Only the rest goes out by the method you pick.
Customers holds everyone you sell to by name. A customer on a sale can earn points, buy on account within a credit limit, pay with store credit, receive a statement of what they owe, and, once they agree, get your offers by SMS and email.
- 1
Add a customer
Customers → All customers → Add customer needs only a name and a phone number or an email to start, and a phone or email belongs to one customer only. Add a group and tags, an address for invoices and statements, and a first note. At the till, Create New does the same.
- 2
Set credit and tax terms
Credit and tax holds the Credit limit, where 0 means no sales on account, the Payment terms (days) a credit sale falls due after, and Tax exempt with a certificate number and an optional end date. Changing them needs the Set credit limits, tax exemption and store credit permission.
- 3
Price groups of customers
Customers → Groups → Add group creates groups such as Wholesale, Staff or VIP with an optional price discount: their customers pay that much less than the shelf price at the POS and on invoices. A product's own Customer group prices win over the discount.
- 4
Read a customer's page
The header shows what they owe, their credit limit, store credit and points. Tabs hold Profile, Notes, Store credit, Gift cards, Loyalty, Statement, Purchases and Messages. Purchases shows their total spent, average sale and most-bought items; Messages lists everything Posify sent them. Profile → Marketing holds their consent to offers, their birthday and the language for messages.
- 5
Send a statement or a reminder
The Statement tab lists every sale left owing, payment, return and opening due with a running balance. Send statement emails it, Send reminder sends a payment reminder by email or text, and Add opening due enters what they owed from before Posify.
- 6
Write off a debt
When a due will not be paid, Write off on the Statement tab takes it off as a bad debt at the sale's branch; it shows on their statement and can be undone. It needs the Write off what customers owe permission.
- 7
Import, export and merge
Import reads a CSV with an Email or a Phone column, matches existing customers by email, then phone, and shows a check before anything is written; Update existing customers writes the file's filled-in cells over theirs. Export downloads the list as filtered, and Merge… folds a duplicate into the customer you keep.
- 8
Archive rather than delete
Only a customer with no history can be deleted; anyone with sales, notes or store credit is archived instead. An archived customer keeps their dues, points and credit but cannot be put on a sale until restored.
Change many customers at once
Tick customers on the list to Add tag, Remove tag or Change group in one go. Filters for group, tag, branch and status (Owing, With store credit, Archived) narrow the list first.
Offers go only to customers who agreed
Each customer has a consent state for SMS offers and one for email offers, with the history of every change. Receipts, reminders and statements go whatever the state. The Marketing chapter explains consent, segments, campaigns and coupons.
One phone, one customer
Two customers cannot share a phone number or an email. If one person was added twice, merge the records: their sales, payments, points, store credit and gift cards move to the one you keep.
Deposits and dues are paid in different places
A deposit's balance is collected from the till's Sales list when the goods are handed over, never by a receipt. A credit sale is paid with Receive due at the till or a customer receipt in the back office.
Everything you sell lives under Products: All products, Categories, Brands, Units and Global Variants. Set up categories, units and tax groups before adding products, so each new product starts filed and taxed correctly.
- 1
Work the product list
Products → All products has All, Active, Draft and Archived tabs, a search by name, SKU or barcode, and filters for kind, category, brand and stock. Tick rows to Set active, Set draft, Set archived, Delete or Print labels; a row's Quick edit changes price, compare-at price, cost and status without opening the product.
- 2
Build the category tree
Products → Categories → Add category takes a Name, a Description, an image, a Parent category (None (root category) for the top level), a Display order and a Status. Categories nest up to three levels deep.
- 3
Let categories carry defaults
A category can name a Tax group, a Loyalty points back share and a set of options such as size or colour. Products filed in it, and subcategories that set none of their own, take these over.
- 4
Add brands
Products → Brands → Add brand takes a name, description, logo and website. A brand switched off stays on the products that carry it but is not offered for new ones.
- 5
Set up units
Products → Units → Add unit takes a Name, a Symbol and Decimals: 0 for things you count, like pieces; 3 for weights like 0.250 kg. Once products use a unit, its decimals can grow but never shrink.
- 6
Save options once in Global Variants
Products → Global Variants → Create option template defines an option such as Colour, Size or Storage with its values, as text or as colours with a swatch. A product copies the values when you add the option, so later edits here do not change it.
Status decides what reaches the till
Active products sell at the POS and show on every list; Draft is being set up and never reaches the POS; Archived is kept for history, hidden and cannot be sold.
Archive what has history
A product with sales or stock history cannot be deleted, so archive it. Archiving, turning off stock tracking or removing variants is refused while a branch still holds the stock or a transfer carrying it is in transit.
Import categories and brands too
Categories and Brands each have their own CSV import and export. Only the name column is required, and a parent can be written as a path such as Food > Snacks.
This is the path from an empty form to a product on the till, card by card in the order the form shows them. The left column carries the product's content; the right holds its status, where it sells and how it is filed.
- 1
Start a new product
Products → All products → Add product; it needs the Add products permission. Set up categories, units and tax groups first, so the pickers have something to offer.
- 2
Fill in the details
Name it as it should read on the till and the receipt, such as Green Tea 500 g. Choose the Kind: Goods for stock that is counted, Service for something sold but never stocked, or Gift card. Add a Description and, if useful, Internal notes, which staff see and receipts never print.
- 3
Add pictures
Drag and drop images or videos into Media, paste with Ctrl+V, use Select existing for files already uploaded, or add a YouTube or Vimeo link. The first image is the product's cover.
- 4
Set the price
Type the Price; the card says whether prices include tax or tax is added on top, as Settings → General Settings decides. Compare-at price shows a higher was-price beside it, and Cost, seen with the See costs permission, works out Profit and Margin.
- 5
Choose how it is taxed
Tick Charge tax on this product, then pick its Tax class or leave it to inherit from the category or branch. Untick it and the product is sold tax-free (0%), whatever its category says.
- 6
Set points and special prices
Loyalty points sets this product's own Points back share; empty takes the category's or all products' rate. With more than one branch, Prices by branch sets a price per branch, and once customer groups exist, Customer group prices sets what a group pays.
- 7
Set up stock and barcodes
In Inventory, leave SKU empty to have one made, or press Generate a SKU; scan or type the Barcode, or leave it empty to have one made on save. Pick the Unit of measure, keep Track quantity on for goods you count, and set a Reorder level for low-stock alerts.
- 8
Choose the stock rules
Track batches and expiry receives goods with a batch number and expiry date and sells the batch that expires first. Sell below zero at the POS lets the till keep selling when the shelf count says none are left, and reports what was oversold.
- 9
Enter opening stock
On a new goods product, Opening stock takes what is already on your shelves, branch by branch: the quantity, the cost per unit and, for batches, the batch number and expiry. It is saved once per item and branch; after that, stock changes through Inventory.
- 10
Build variants
If it comes in sizes, colours or other options, add them under Variants: every combination becomes a variant with its own price, SKU and barcode. Variants in depth, below, walks through it.
- 11
Choose status and where it sells
Status is Active, Draft or Archived. With more than one branch, Sold at chooses which branches' tills and invoices offer it, Every branch by default.
- 12
File it and save
The Organization card takes the Category, Brand, Usual supplier (purchase orders start from it) and Tags. Save; the product's page then adds Print labels, Delete product and a Stock by branch card.
Variants in depth
1. Add an option
The Variants card starts with a link to add options such as size or colour. A product takes up to five options, and Add another option appears under the last one until you reach that.
2. Name it, or reuse a saved one
Type an Option name such as Size or Material, or pick one of your Global Variants to bring in its values. Save for reuse keeps a new option as a template for future products.
3. Type the values
Add another value takes one value at a time. Name an option Colour and each value gets a colour swatch; drag values by their handle to set their order, and remove one with its cross.
4. Read the generated grid
As soon as an option has values, every combination appears in a grid you can group by any option and fold away. Each row shows the variant's picture, its price, which you can type in the row, and what is on hand across branches.
5. Edit many at once
Tick rows, or a whole group, then Set price, Set compare-at price, Generate SKUs, Generate barcodes or Delete selected variants. Deleted variants go when you save the product.
6. Open one variant
Opening a row edits that variant's picture, chosen from the product's own media, its price, compare-at price, SKU, barcode and reorder level. Untick Create this variant to drop a combination you do not sell.
The kind is fixed
Goods, Service or Gift card is chosen when the product is created and locked after that. To sell the same thing as another kind, create a new product.
Stock is never typed into the product
On hand changes through receiving, adjustments and counts. The form shows Stock by branch, and offers Opening stock only where the item has no stock history yet.
Save as a draft and finish later
Set Status to Draft on the first save: the product is kept but never reaches the POS until you make it Active.
Every product or variant that is scanned needs a code that belongs to it alone. Posify checks the codes you enter, makes its own when you leave the field empty, and prints labels for anything with a barcode.
- 1
Use the code on the pack
Scan or type the manufacturer's code into Barcode. Barcode standard is detected for you with Auto-detect, or chosen: EAN-13, UPC-A and GTIN-14 have their check digit verified, and anything else is Code 128. Barcode source records whether it was Printed by the manufacturer, Issued to us by GS1, Internal (this business only) or Not specified.
- 2
Let Posify make one
A product or variant saved without a barcode gets an internal EAN-13 starting with 20, a range kept for use inside one business: it scans at your tills and on your labels, but it is not a trade barcode. Generate a barcode on a product, and Generate barcodes for variants, do the same on demand.
- 3
Open the label studio
On Products → All products, tick products and choose Print labels, or use Print labels on one product's row or on its page. Only products and variants with a barcode get a label.
- 4
Set up the label
Pick the Label size (40 × 25, 50 × 30 or 60 × 40 mm), the Printer language (ZPL or TSPL), the Resolution (203 or 300 dpi), how many copies of each item or One label per unit on hand, and whether to Show SKU and Show price. The preview shows the first label.
- 5
Print it one of three ways
Print through the browser works with any label printer that has a driver; print at actual size. Download ZPL or Download TSPL saves the printer commands as a file. Print to the thermal printer sends them through QZ Tray to a printer chosen with Find printers.
One code, one item
A barcode belongs to one product or variant across the whole catalogue, and saving one already in use is refused: Barcode is already assigned to another product or variant. Spaces, dashes and letter case are ignored when codes are compared.
ZPL and TSPL print Latin letters only
Any other script prints as a question mark, so names in Bangla, Arabic or Chinese should print through the browser. In ZPL and TSPL, EAN-13 and UPC-A print as themselves and every other code as Code 128.
Test before a long run
TSPL assumes a 2 mm gap between labels, so calibrate the printer for other rolls. A barcode with a wrong check digit stops the print and names the product to correct.
Moving from another system, or keeping a spreadsheet beside Posify? Lists export what their filters show, and products, categories, brands, customers, opening stock, opening dues and gift cards come in from CSV files that are checked before anything is written.
- 1
Start from the sample
Products → All products → Import / Export → Download sample file gives a CSV whose rows are already filed under your own categories and units. Fill it in rather than building a file from scratch.
- 2
Import products
Import matches each row to a product by its id, else its SKU, else its barcode, and otherwise creates one; an empty cell keeps the current value. Categories, brands, units and tax groups must already exist, and stock is never imported here.
- 3
Import categories and brands
Categories and Brands each have an import of their own. Only the name column is required, and a category's parent can be its name, its slug or a path such as Food > Snacks.
- 4
Load opening stock
Inventory → Opening stock reads a CSV with sku or barcode, location (a branch's code or name), qty and an optional unit_cost. Every row is checked first, and the file goes in all or nothing, up to 2,000 rows.
- 5
Import customers
Customers → All customers → Import takes a CSV with an Email or a Phone column and matches existing customers by email, then phone. Check the file shows what will be added, updated or skipped, and can tag every imported customer.
- 6
Import what people owed
Money in and out → Receivables, or Payables for suppliers, has Import opening dues for what each customer or supplier owed when your books started here. Add the customers and suppliers first: the import does not create them.
- 7
Import existing gift cards
Gift cards → Import brings in cards your customers already hold, with code, balance, expiry, customer and note columns. Codes made for rows without one are shown once, as a file to download and keep safe.
- 8
Export what a list shows
Export on products, customers, suppliers, sales, returns, register sessions, stock, purchase orders, goods received, expenses, gift cards and staff downloads every row the filters select, not only the page on screen. Reports and statements download as CSV or PDF.
Fix the file, then import again
Rows with a problem are listed by row number with the reason. A product import that stopped part-way can simply run again: rows with an id or SKU update what it already created instead of adding copies.
Exports leave a trace
Every export is recorded in the activity log, since the file is the only sign that a copy was taken.
Posify keeps one on-hand figure per item at each branch, and every change is a movement with a reason, a person and a document behind it. Nothing edits a figure quietly: a mistake is corrected by a later adjustment or count.
- 1
Read the stock list
Inventory → Stock lists every stocked item with what is on hand at the chosen branch, or By branch across yours, plus Incoming (shipped transfers and open purchase orders) and Committed (promised to transfers). Value shows with the See costs permission, and Export writes every row the filters give.
- 2
Correct a figure on the spot
Choose a branch, then type the right figure in Available. A bar counts the unsaved changes; Ctrl+S saves and Esc discards. Each save goes in as one adjustment with the reason Correction, so a sale made meanwhile is kept.
- 3
Record damage, loss or a find
Inventory → Adjustments → New adjustment: pick the items and a Reason — Damaged, Expired, Lost, Theft and Internal use take stock out, Found brings it in, Correction and Other go either way — then the quantities and a note, and Apply adjustment.
- 4
Approve what waits
With Settings → Inventory → Approve adjustments on, an adjustment from someone who cannot approve waits as Waiting for approval and moves nothing. An approver opens it and chooses Approve and apply or Reject, with a note for the record.
- 5
Set reorder points and bins
A row's menu sets this branch's Reorder point, or Use the default, and a Bin location such as A-03, the order stock counts walk the shelves in. The reorder point comes from the branch first, then the variant, the product and Settings → Inventory → Low stock at.
- 6
Order what runs low
Inventory → Low stock lists items at or below their reorder point, worst first, with what is incoming and what is left To order. Draft purchase orders makes one draft per supplier and branch for items whose product has a usual supplier; nothing goes out until you send it.
- 7
Trace every unit
Inventory → Movements shows every unit that arrived or left, newest first, with who moved it, the document and the balance after it. Narrow it to one item, a type or Only sold below zero, and pick the period.
- 8
Load opening stock
Inventory → Opening stock imports what is already on the shelves when you start, branch by branch, from a CSV; it needs the Adjust stock permission. An item that already has movements at a branch is refused there: change it with an adjustment or a count.
Cost is a moving average per branch
Units arriving at a known cost move the branch's average, and units leaving take the average with them. Stock whose cost was never known is counted as unknown, never as 0.
The back office does not go below zero
Settings → Inventory → Stock below zero in the back office refuses adjustments and transfers that would take a level below zero, unless you set it to Allow. The till follows its own rule in Settings → Point of sale.
Keep counting and approving apart
Settings → Inventory → Another person approves stops whoever made an adjustment or finished a count from approving it themselves.
A transfer moves stock in two halves — shipped by the sending branch, received by the other — so units on the road sit on nobody's shelf. A stock count compares the shelf with what the system expects and corrects only the difference.
- 1
Create a transfer
Inventory → Transfers → Create transfer: pick the From branch, which must be one you work at, and the To branch, add items against what is available at the source, and add a reference or an internal note. Save as draft, or Create, ready to ship.
- 2
Ship it
Ship transfer takes the units out of the source branch at once, and the destination sees them as incoming. A line that needs more than the source holds stops the shipment until it is restocked or the draft is edited.
- 3
Receive it
At the destination, Receive items: accept what arrived and reject what came damaged or short, with a note. Rejected units are written off as Rejected on transfer, anything not entered stays outstanding for a later receipt, and the transfer completes once every unit is received or rejected.
- 4
Cancel when plans change
Cancel transfer before shipping moves nothing. In transit, cancelling brings the units back to the source at the cost they left with; once anything has been received, it is refused.
- 5
Ask another branch for stock
Inventory → Transfers → Request stock asks another branch for items, and the till's Request does the same for an item that is out where you are. The branch asked can Approve, which makes it ready to ship, or Decline with a reason; you can Withdraw request while it waits.
- 6
Start a count
Inventory → Stock counts → Start a count: a Full count puts every item the branch holds on the sheet, up to 5,000 lines; a Partial count starts empty and fills as you scan or add the items of one aisle or shelf.
- 7
Count the shelf
In the Scan box, each scan of a barcode, or a typed SKU and Enter, adds one unit; or type a line's counted figure. Several people can count one sheet at once, Not counted shows what is left, and Find a line jumps to an item.
- 8
Finish and apply
Finish count applies the differences as one adjustment with the reason Stock count; lines nobody counted keep the stock the system has. With Settings → Inventory → Approve stock counts on, Send for approval waits for an approver instead.
A sale during a count is kept
A line's expected figure is what the branch held when the line was first counted, and only the difference is applied, so a sale rung up in the meantime is not undone.
One open count per item
An item can sit on only one open count at a branch. Adding it to a second count, or starting a full count while another holds it, is refused and names that count: finish or cancel it first.
Batches are counted by batch
For items kept by batch, Count by batch records the figure for each batch on the shelf, and A batch not listed adds one you find that the sheet did not expect.
Buying follows one chain: a purchase order, a goods receipt when the delivery arrives, the supplier's bill and the payment. Goods that go back leave against the receipt they arrived on, and every step posts what the books need.
- 1
Add the supplier
Suppliers → Add supplier takes the name, a code, the contact person, phone, email, website, address, Payment terms (days) and Tax ID. Reverse charge and Withholding tax on payments set how their bills and payments start.
- 2
Write the purchase order
Purchases → Purchase orders → New order: choose the supplier and the branch the goods are for, the order date and when you expect them, then add products with a quantity, unit cost and tax. Save as draft, or Save and send.
- 3
Send it
Send order marks the order as sent to the supplier. Sending is approving, so it needs the Approve purchase orders permission; while nothing has arrived, Back to draft reopens it for changes.
- 4
Receive the delivery
On the order, Receive goods: enter what arrived of each line, or take Everything still to come, check the unit cost net of tax and note the delivery note number. Items kept by batch need a batch number or expiry date. Receive into stock puts them on the branch's shelf.
- 5
Receive without an order
Purchases → Goods received → Receive without an order records a delivery that was never ordered through Posify. An order that will never arrive in full is ended with Close order.
- 6
Record the supplier's bill
Purchases → Supplier bills → Record a bill, or Record the bill on a goods receipt: pick the supplier, enter their invoice number, the bill date and due date, bill the goods received at the invoice price, and add any Charges such as freight. A price above or below the received cost is kept as price variance.
- 7
Pay the supplier
Purchases → Supplier payments → Pay a supplier, or Pay this bill on a bill: the amount, how it was paid (Cash, Bank transfer, Card, Cheque or Mobile money), the account it left and a reference. Spread oldest due first puts it on their open bills, and anything left stays with them as an advance.
- 8
Send goods back
Open the goods receipt the goods came on and choose Return goods: how many go back and why. Billed units come off what you owe; a credit no bill takes can be taken off another bill or recorded when the supplier pays it back. Purchases → Purchase returns lists them all.
Mistakes are reversed, never edited
A goods receipt entered by mistake is reversed while nothing on it is billed or returned; a bill is voided while nothing is paid or credited on it; a payment is reversed for a bounced cheque. Each asks for a reason and needs the Reverse payments, receipts, transfers and goods received; void bills and expenses permission.
The supplier's page
A supplier's page has Details, Notes, Purchases and Statement tabs: open bills, what is overdue, advances, and every bill, payment and return with a running balance. Add opening due records what you owed them from before Posify.
Let low stock draft your orders
Give products a Usual supplier and Inventory → Low stock → Draft purchase orders writes the drafts for you, one per supplier and branch.
Money in and out holds the money that is not a sale or a supplier bill: what customers pay toward their dues, the costs nothing else records, and the cash and bank accounts it all moves through. It also shows who owes the business and whom it owes.
- 1
Take a payment toward a customer's dues
Customer receipts → Receive payment: choose the customer, the branch and day, the method, the account it went into and the amount. What it pays lists their credit sales and opening dues, oldest first; anything left is kept as an advance, to put on a later due with Apply advance.
- 2
Settle for less, or reverse
Write off the rest settles the dues for a little less and books the gap as a settlement discount. Reverse receipt, with a reason, undoes a bounced cheque or a payment put against the wrong customer: everything it paid is owed again.
- 3
Record an expense
Expenses → Record expense: the date, the branch or Head office, a category such as Rent & utilities or Salaries & wages, what it was for, who was paid and the amount. Attach the receipt, and say which account paid it, or record it as not paid yet.
- 4
Make it repeat
Switch on Repeats, choose How often — every week, month, quarter or year — and an optional last copy. Each copy is recorded on the day it falls due, and the Repeating tab lists the originals.
- 5
Mark a bill as paid
An expense recorded as not paid yet shows under Payables until Mark as paid, which is dated the day the money really left. Mark as not paid undoes a payment entered by mistake.
- 6
Move money between accounts
Cash and bank lists each cash and bank account with its balance. Add bank account and Add cash account create them, Transfer money banks cash or tops up a branch's cash, Bank it clears the cash taken out of a till, and Opening balances enters what each account held when you started.
- 7
Reconcile the bank
Bank reconciliation: choose the bank account, Start a statement with its date and closing balance, and tick each line of money in and out until the Difference is zero, then Finish. It needs the Post journal entries permission; a bank charge the books do not have yet is posted first with New journal.
- 8
Record the owner's money and loans
Owner's money and loans records Owner put money in, Owner took money out and Record a loan, each with its own journal. Receivables and Payables then show, by age, what customers owe the business and what it owes suppliers.
A cash account pays out only what it holds
An expense, a bill marked paid or a transfer that would take a cash account below zero is refused, naming its balance. Someone with Post journal entries can Record anyway when the money really left before a sale reached the books.
Corrections are reversals
Receipts, transfers and opening balances are reversed, never edited. Changing an expense's money reverses the old version on its own date and posts the new one, and a voided expense stays on the list, marked void.
Repeating copies need the background jobs
Repeating expenses are written by a scheduled job. If copies stop appearing, ask whoever runs your server to check the background jobs shown in Settings → Maintenance Mode.
Posify keeps a double-entry ledger beside the shop: every sale, return, purchase, payment, expense and stock change posts its own journal when it is saved. Accounting holds the accountant's pages for reading, correcting and closing those books.
- 1
Read the journals
Accounting → Journals lists every journal, numbered JV-…, with a search by number, document or memo and Export. Open one to see its lines, the document behind it and, when it landed outside its month, the closed month it belongs to.
- 2
Post a manual journal
New journal takes a memo, which is required, and at least two lines, each a debit or a credit on an active account; it shows Out of balance by … until the two sides agree. Accounts that a list of documents keeps, such as Accounts receivable, Inventory or Store credit payable, are refused.
- 3
Correct with Reverse
A journal is never edited or deleted. Open a manual journal and Reverse posts its mirror image; automatic journals are corrected through their document, such as a return, a void or a reversed receipt.
- 4
Keep the chart of accounts
Chart of accounts lists every account by type with today's balance; click one to open its ledger. Add account creates your own, with a code, a name, its type and kind and the account it sits under, and Deactivate takes an account with no balance out of the pickers.
- 5
Follow one account
General ledger shows one account's lines between two days, with the balance brought forward, a running balance and a link to each document. Trial balance gives every account's debit, credit and balance as of a day, for one branch or Each branch apart.
- 6
Register fixed assets
Fixed assets → New asset: the name, cost, when it was acquired, its Useful life (years) and its Worth at the end, and whether it was bought from a cash or bank account or already owned. Its cost is written off in equal monthly shares, and Sold or scrapped takes it off the books.
- 7
Run the books check
Books check shows whether the trial balance balances, the Postings waiting with Post now, What needs a look, the closed months read again and the control accounts against their records. Check the documents replays every document against its journal.
- 8
Close a month
Fiscal periods → Close a month checks the month first; fix what it finds, or Close anyway and say why. A closed month keeps its figures, and Reopen undoes only the latest close.
Late documents land in the next open month
A document dated in a closed month is still accepted, but its journal is posted on the first open day and marked with the month it belongs to. A manual journal dated in a closed month is refused.
Hide the accountant's pages
When nobody keeps the books by hand, Settings → Accounting → Accountant tools in the menu takes these pages out of everyone's menu. The statements and Money in and out stay, and every document keeps posting.
Who may do what
Reading needs See the books; manual journals, opening balances and Post now need Post journal entries; the chart needs Manage the chart of accounts; closing needs Close financial periods. Changing the chart and closing months also need someone who works at every branch.
Statements are read from the journals, so they agree with each other to the cent. Pick a period, read one branch or every branch side by side, and download any of them as CSV or PDF.
Profit and loss
Revenue less returns and discounts gives Net sales, then Cost of sales, Gross profit and Gross margin, Operating expenses, Operating profit, other income and expenses, and Net profit, each line also as a share of net sales. Each branch apart adds a column per branch.
Balance sheet
Assets, liabilities and equity as of today or the end of the last month, quarter or financial year. Retained earnings (earlier years) and Profit for this financial year are worked out each time, and the sheet says whether assets equal liabilities plus equity.
Cash flow
Where the period's cash came from and where it went: operating, investing and financing activities, the net change in cash, and the cash at the start and at the end.
Changes in equity
The owner's stake from the period's start to its end: the profit or loss, the money the owner put in or took out, and opening balances recorded in the period.
Cash book
Every cash and bank account, and cash in transit once it has been used: brought forward, money in, money out and carried forward. Open the book of one account for each line, its document and the running balance.
Expenses by category
Every line posted to an expense account in the period — expenses, bill charges, loyalty rewards, cash shortages — by category with its share of the total. Include cost of sales adds the cost-of-sales accounts.
Tax report
Output tax on sales and input tax on purchases, by month and by rate, with the net tax payable or reclaimable, a Not by rate line for rounding and entries by hand, and the tax-exempt sales with their reasons. Settle tax records what you paid the tax office for a period.
Periods and the financial year
This month, Last month, This quarter, Last quarter, This financial year, Last financial year or dates of your own. The financial year starts on the day set in Settings → General Settings → Financial year and tax.
Who can read them
The statements open with See the books or Financial reports, and the tax report with See the books or Tax reports. Someone limited to some branches sees only their branches' lines, with a note saying so.
The tax report is not a tax return
It gives the totals to hand your accountant or tax adviser. Rates, thresholds and filing stay with them.
When PDF is unavailable
PDF files need Chrome or Chromium on the server; without it the PDF button says so and CSV still works. Ask whoever runs your server.
Loyalty points are earned on what a named customer buys and spent at the till; store credit is money held on a customer's account. Both are money the business owes until they are spent, and both need a connection: an offline till does not offer them.
- 1
Switch the programme on
Settings → Loyalty → Loyalty points starts earning. To let the till take points as payment, also switch on Loyalty points in Settings → Payments; Store credit is switched on there too and needs no programme.
- 2
Decide how points are earned
Points back on all products is the share of what the customer pays that comes back as points, after discounts and before tax. Set the Value of one point, the Rounding of earned points, the Fewest points spent at once and the Largest share of a sale paid in points; the page shows a worked example as you type.
- 3
Give products and categories their own rate
A product's Loyalty points card and a category's Loyalty points back set their own share; empty takes the level above, and 0% means no points. Gift cards never earn, and services follow Services earn points.
- 4
Reward regulars with tiers
Tiers start as Bronze, Silver, Gold and Platinum from 0, 500, 2,000 and 5,000 lifetime points, each with a multiplier that scales what its members earn. Lifetime points are those earned less those taken back; spending never lowers them.
- 5
Spend points at the till
With a customer attached, Take payment → Loyalty points shows their points, Points to spend and a Use … button for the most they may spend, with the rules spelled out. On a back-office invoice, Pay with points does the same.
- 6
Adjust points by hand
The customer's Loyalty tab → Adjust points: Add points or Take points off, in whole points, with a reason. It needs the Add or take off points by hand permission and is written to the activity log.
- 7
Give or take off store credit
The customer's Store credit tab → Give credit takes an amount, an optional expiry date and a reason; Take off removes credit given by mistake, the soonest-expiring first. Both need the Set credit limits, tax exemption and store credit permission.
- 8
Spend store credit
With a customer attached, Take payment → Store credit spends their balance, the soonest-expiring credit first. Credit refunded on a return lasts as long as Settings → Payments → Store credit from returns expires after says; 0 keeps it for good.
Who earns what
Walk-in sales earn nothing, and the part of a sale paid with points or a gift card earns nothing. Deposits and credit sales earn as the money comes in, and a sale taken offline earns once it syncs.
Returns take points back
A return takes back the points its goods earned, and a void takes back all of them. A balance can go below zero, and the customer's next points pay it back first.
Points do not expire in 1.0
Customers keep their points until they spend them or a return takes them back. Store credit does expire, and Settings → Notifications → Store credit expiring can warn your staff and, if you choose, each customer.
Gift cards are sold at the till through a product of kind Gift card and spent by whoever holds the code. The Gift cards page, in the Operations group, lists every card and holds the actions that need a manager.
- 1
Switch them on
Settings → Gift cards → Sell and reload gift cards lets the till sell cards, and Accept gift cards as payment, with Gift card on in Settings → Payments, lets it take them. Then add a product of kind Gift card with a Suggested amount, or 0 for any amount.
- 2
Sell or reload a card
Tap the gift card product: New card takes the amount, how many cards and an optional email for the code; Reload a card takes a typed or scanned code, Check, and the amount to add. Cards sell at their value — no tax, no discount, no points — and at most 50 new cards go on one sale.
- 3
Hand over the code once
The sale-complete screen shows each code large, with a copy button, and the receipt prints the card number, the code, the PIN when there is one, the value and the expiry. A receipt printed again later shows only the last four characters of the code.
- 4
Take a card as payment
In Take payment choose Gift card, type or scan the code and press Check; a card with a PIN asks for it. Pay all or part of the sale: the dialog shows what will be left on the card, and the receipt prints it.
- 5
Check a balance
On the till, the gift icon in the cart's header opens Gift card balance; in the back office, Gift cards → Check a code. Neither needs the PIN, and the code is not kept.
- 6
Work the Gift cards page
Tabs split cards into All, Active, Spent, Blocked, Void and Expired, and the search takes a card number or the last four of a code. Tiles show what is Owed on live cards, Left on expired cards, Issued this month and Spent this month, and Export downloads the list without codes or PINs.
- 7
Block, void or extend a card
Open a card to Block a lost or stolen one, Unblock it, Void it — its balance goes to the buyer's store credit, or to income when no customer bought it — Extend expiry or Edit note. Each asks for a reason and needs its own permission.
- 8
Issue or import cards
Issue gift card gives a card with nothing paid, as a promotion or compensation. Import brings in the cards your customers hold from before Posify, from a CSV.
Whoever has the code can spend the card
Show code, New PIN, Email the code again and Print slip ask why, and the reason is kept in the activity log. They need the Show gift card codes and set new PINs permission, which only the Administrator role has to begin with.
Wrong PINs lock the card
Five wrong PINs lock a card's PIN: for 15 minutes the first time, an hour the next, then a day each time after. The right PIN, or a new PIN set by a manager, starts it again.
Expired cards stay owed
Money left on an expired card stays owed unless Book expired cards as income (breakage) is on in Settings → Gift cards. Whether you may keep it depends on the law where you trade, so ask your accountant first.
Marketing lets you send customers offers by SMS and by email and see what came of them. Posify has no sending service of its own: every message goes out through the SMS and email set up in Settings → SMS and Settings → Email, and offers go only to customers who agreed to get them. You find it in the sidebar's People section.
- 1
Check what you need first
A campaign by SMS will not start until SMS is switched on and one test message has been sent (Settings → SMS). A campaign by email needs Settings → Email. Whoever installed Posify must also run the marketing-send background job every minute, or a scheduled campaign never starts. Loyalty is needed only for tiers.
- 2
Record who agreed to offers
Each customer has a state for SMS offers and one for email offers: Not asked (the start for everyone), Agrees to offers, Does not want offers, and Not working (a number or address that gets no messages; only Posify sets it). Change them on the customer's page under Profile → Marketing, which shows the last ten changes. At the till, adding a customer quickly offers Agrees to get offers by SMS or by email once you type a phone or an email; both start unticked. Changing consent needs the Customers: edit permission.
- 3
Know the consent rules
A customer who said no can agree again, but the person recording it must write how. A new phone number or email starts again at Not asked. Archived customers get no offers. Receipts, payment reminders, statements and other messages about the customer's own account go whatever the state; consent is only for offers.
- 4
Bring consent in with an import
Customers → Import can read the columns Accepts SMS Marketing, Accepts Email Marketing or Accepts Marketing: yes or true there becomes Agrees to offers, and anything else changes nothing. The dialog asks you to tick These customers really agreed to get offers first. Without the tick, the consent columns are left out and nobody is agreed.
- 5
Write the words
Marketing → Templates has two tabs. Sent automatically holds the messages Posify already sends (the receipt, payment received, the payment reminder, store credit expiring and the statement): edit the words for each language, or press Back to the default text. Offers holds your own offers for campaigns and automations: a name, an SMS text, and an email with a subject, paragraphs and an optional button. An offer needs words at least in the business's default language.
- 6
Use blanks and read the preview
Write {customer_name}, {first_name}, {business} and the like, and each customer gets their own values; offers also take {tier}, {points}, {store_credit} and the coupon's {coupon_code}, {coupon_value} and {coupon_ends}. A misspelt blank is not saved, and the editor lists the blanks that work. The preview uses a sample customer and shows how an SMS is billed, for example 142 characters, GSM-7, 1 SMS. Bangla, Arabic, Chinese and other scripts are Unicode, so one SMS holds 70 characters.
- 7
Build a segment
Customers → Segments are lists made from rules that keep themselves up to date; they are for lists and messages, never for prices (a group, set by hand, can have its own prices). A customer is in the segment when every rule you fill in holds: tier, group, tags, the branch first added at, what they bought and when, birthday month, owes money, has store credit, points, SMS or email consent, and language. The count shows as you build. Seeing a segment needs Marketing: view; the purchase rules need the permission to view sales.
- 8
Send a campaign
Marketing → Campaigns → New campaign walks through five steps. Who: tier, group, tag, branch, consent, a segment, or customers picked on the customer list; the filters combine. How: SMS, email or both. What: an offer template, its preview, and Send me a test to your own phone or inbox, which counts toward no limit. The count: how many customers, how many are left out and why, and about how many texts. When: now, or a date and time; a time inside the quiet hours starts when they end. Over 50 people Posify asks you to confirm again, and over 500 you type the number.
- 9
Know how it goes out
The audience and the words are fixed when the campaign starts, so someone who agrees later is not added and editing the template changes nothing. Someone is left out if they have not agreed, have no phone or email, have a number or address that does not work, said no, had enough offers lately, or the day's SMS limit was reached. It goes out in batches of 100 per channel, nobody gets the same campaign twice, and Pause, Resume and Cancel are on the results page. When the day's SMS limit is reached it pauses by itself, goes on the next morning, and the Owners get a notification.
- 10
Read the results
A campaign's Results page counts, for each channel and in all, who was chosen, left out (by reason), sent, delivered and failed, and the SMS parts the texts were billed as. Came back counts the customers it reached who bought within 7 days of their message, and what they spent; that shows they came back, not that the message brought them. Used the code appears when the offer carried a coupon. The recipient list can be filtered and exported as CSV.
- 11
Message one customer
Send message on a customer's page, or on its Messages tab, sends one message of a kind you choose first. Service is about their own purchase or account and needs no consent. Offer needs their consent and obeys every limit. The Messages tab lists every message Posify sent them, receipts and reminders included, newest first, with whether it was delivered or why it failed.
- 12
Switch on automations
Marketing → Campaigns → Automatic holds four, each off until you switch it on and choose an offer template: Birthday wishes, We miss you (when the last purchase was exactly N days ago, 60 by default), Thank you for the first purchase, and Moved up a tier (needs loyalty on). Each goes by SMS, email or both, only to customers who agreed, and obeys the quiet hours, the frequency limit and the day's SMS limit. Each can be limited to a segment, can carry a coupon, and has its own results page.
- 13
Make a coupon
Switch coupons on in Settings → Marketing → Coupons; they are off for a new business, and while off Marketing → Coupons is hidden and no coupon is taken anywhere. Marketing → Coupons → New coupon takes a code of 4 to 20 letters and digits, a percentage (with the most it takes off) or an amount off the sale, the least spend, optional start and end dates, uses in all, uses per customer, and who may use it: everyone, some tiers, some groups, a segment's customers, or the customers a campaign went to. A separate code for each person makes a 10-character code per customer when their message goes.
- 14
Take a coupon at the till or on an invoice
Apply coupon at the till's sale, or on a back-office invoice, takes the coupon off the whole sale after the lines' own discounts. Choose the customer first when the coupon is for some customers only or has a limit per customer. An offline till hides the button, and a sale with a coupon is never taken offline. Voiding a sale or returning all of it gives the use back. Reports → Coupons shows uses, discount and sales by coupon, and the Discounts report shows coupons on their own line.
- 15
Set the limits
Settings → Marketing holds: Quiet hours (21:00 to 09:00 to start, on the business's clock); Offers to one customer (2 in 7 days to start); Offer texts a day (1,000 to start; receipts and reminders do not count); the Line under an offer text; how long Message history is kept (24 months); and Came back after (7 days). A 0 in Offers to one customer or in Offer texts a day means no limit, and the same time twice in Quiet hours means none. This page needs the Marketing: manage permission.
- 16
Let customers say stop
Every offer email ends with an Unsubscribe link that needs no sign-in, and mail apps show their own Unsubscribe button; either one sets the customer's email consent to Does not want offers. With Twilio, a customer who replies STOP is blocked by Twilio, and Posify then sets their SMS consent to Does not want offers and never tries the number again. With another SMS gateway Posify cannot see replies, so the line under each offer text must say how to stop them, and your staff record it on the customer's page when someone asks.
Offers need consent
In many countries, including the EU and UK, the United States, Canada and Australia, an offer by SMS or email needs the customer's consent. In some countries the SMS sender's name must be registered with the carriers first. Ask your SMS company about the rules where you trade. This manual explains what Posify does and is not legal advice.
Your SMS company bills every text
Posify shows how many texts a campaign needs, not their price, because prices differ by country and by SMS company. Twilio or another SMS gateway bills you for each message.
Sending a lot of email
A mailbox such as Gmail, Outlook.com or your web host's is made for people, not for hundreds of offers at once. For more than a few hundred emails, use a bulk email service in Settings → Email, send from your own domain with SPF, DKIM and DMARC set up, start small, and send only to customers who agreed. Posify sends at most 100 emails per run of the job.
Who may do what
Marketing: view opens the menu, campaigns, results and templates. Marketing: send sends to one customer or many, schedules, pauses and cancels. Marketing: manage edits templates, segments, automations and Settings → Marketing. Marketing: coupons makes and changes coupons. Anyone who can sell can type a coupon code at the till. A person who works at some branches only sends to customers who bought at their branches. Campaigns, messages sent by hand and consent changes all go into the activity log.
All reports, at the top of the sidebar, opens the reports hub: 46 reports in seven groups, each a page of its own reports. The Coupons report shows only while coupons are switched on, and the Gift cards report only while gift cards are. Every report reads a period and a branch, shows a table with its totals, and downloads exactly what it shows as CSV or PDF.
Sales
Sales by day, month, hour, product, category, brand, customer, customer group, register, branch and payment method, plus Discounts, Coupons and Trending items. Sales by staff and Sales by salesperson need the Staff reports permission.
Registers
Register sessions (Z history): every drawer opened and closed in the period, and how its count came out.
Inventory
Stock on hand, today or as of a past day, Stock valuation with the See costs permission, Stock movements, Stock adjustments, Low stock, Oversold items, Dead stock, Opening stock, and Batches and expiry.
Purchasing
Purchases by supplier, Purchases by item, Outstanding bills and Supplier payments.
Profit
Profit by product, Profit by group, Profit by period, and Purchase and sale: margins over time, and how much of them is costed.
Money owed and statements
Receivables aging, Payables aging, Payments received, Customer statement, Supplier statement and the Customer and supplier summary, with links to the accounting statements.
Loyalty and gift cards
Loyalty points, and the same by customer, by tier and by branch; and Gift cards, with what was issued and spent and what is still owed.
Filters, search and files
Each report has the period picker, from Today to Last financial year or a custom range, a branch, and its own options such as Group by, Rank by or Show. Search these rows and sort by any column; the CSV and PDF carry every row, not only those on screen.
Each group has its own permission
Sales reports, Inventory reports, Purchasing reports, Financial reports, Tax reports and Staff reports open their groups. See the loyalty points reports opens the four points reports alone, for whoever runs the programme.
The till has a report of its own
Sales → Sales History sums up each counter's sales, money and drawers, and the dashboard's six figures open the report behind them.
Figures for your branches only
Someone limited to some branches sees only their branches' figures, and each report says so.
Each person who works for the business gets their own login, a role that says what they may do, and the branches and registers they work at. The activity log then records who did what, with the changes.
- 1
Add a person
Administration → Staff → Add person: name, email, job title and mobile number, a role and any extra roles, and where they work — every branch or the ones you tick, every register or chosen ones. Then Email an invitation, whose link works for 7 days, or Give a first password.
- 2
Fill in their page
A person's page adds a Till role by branch, their Register PIN, a Commission % on sales they are named salesperson on, daily, weekly and monthly Sales targets that show on their dashboard, an Access end date for temporary access, and signed notes.
- 3
Help someone who is locked out
Send a password reset emails them a link. Set a new password is for someone who cannot get email, and can also turn off two-step verification when they lost their phone and backup codes; every device of theirs is signed out.
- 4
Suspend or remove
Suspend ends every session and stops sign-in until Reactivate. Remove deletes only an account that has recorded nothing; anyone with sales, drawers or other records is suspended instead, so those records keep their name.
- 5
Shape a role
Administration → Roles, or the Roles button on the Staff page, lists the presets — Administrator, Manager, Cashier, Accountant, Stock Keeper, Purchaser, Supervisor, Read-only and External Accountant — and any role you add with New role. Tick its permissions, and choose what it Opens on sign-in, Dashboard or POS (the till), and its Dashboard layout.
- 6
Set sign-in rules and till limits
Sign-in security can Require two-step verification and Limit sign-in hours. Till limits cap the Most discount per sale, Most price change, Most refund per return and Most cash out at once; past a limit, a colleague whose own limit covers it approves with their PIN.
- 7
Preview, compare and export
Preview this role shows what someone holding it would see and do, before you save. Compare and export sets every role side by side, to print or download as CSV or PDF for an audit.
- 8
Read the activity log
Administration → Activity log lists sign-ins, changes, approvals, exports and more. Filter by person, action, record type, outcome and date, and View details shows each change before and after.
One login per person
The activity log, drawer counts and approvals only mean something when each account belongs to one person. Switch cashiers at the till with register PINs instead of sharing a login.
You cannot give what you do not hold
Roles with permissions you do not hold yourself are not offered, and nobody can change their own role. The owner holds every permission at every branch.
Start from a starter role
New role offers starter roles for a retail shop, a grocery or supermarket and a pharmacy, such as Sales associate, Checkout operator or Pharmacist, to adjust rather than build from nothing.
A new business charges no tax until you add rates and put them in tax groups. Products, categories and branches are then taxed at a group, and every till works the tax out the same way.
- 1
Decide how prices are read
Settings → General Settings → Financial year and tax → Prices include tax: on, the price you type is what the customer pays and the tax is taken out of it; off, tax is added at the POS. Changing it asks first and applies from the next sale.
- 2
Add your tax rates
Settings → Tax → Tax rates → Add rate: a name such as VAT, a code, and its Kind — Percentage of the price, Fixed amount per unit for a levy on each unit sold, or Withholding tax held back from supplier payments — then the rate itself.
- 3
Combine them into groups
Tax groups → Add group lists the rates charged together, in order. A compound rate is charged on the price plus the taxes before it, and a group with no rates sells tax-free. Reported as says whether it is Standard-rated, Zero-rated, Exempt or Out of scope.
- 4
Pick the defaults
Tax defaults sets the Default tax group, used when neither a product nor its category names one, and the Rounding: Per document (recommended) or Per line.
- 5
Tax products, categories and branches
A category's Tax group, a product's Tax class or tax-free tick, and a branch's Default tax group in Settings → Branches decide what each sale charges. Branch tax overrides charge a group as another group, or tax-free, at one branch.
- 6
Change a rate on a date
On a rate, Change the rate on a date sets a new rate and the day it starts; Only for a while adds a last day for a tax holiday. Tills switch over on their own at midnight, offline too.
- 7
Allow tax-free sales
Tax exemption reasons are the reasons a cashier picks when selling tax-free, and Only the listed reasons stops them typing their own. Who may sell tax-free is either Whoever may give discounts or Only those allowed to sell tax-free, the Sell tax-free permission.
- 8
Print your tax number
Your tax registration takes what the number is called, such as VAT No., and the number itself. Receipts print it when Settings → Receipt → Show tax numbers is on, and a branch registered on its own can print its own number.
No group, no tax
Until there is a tax group everything sells tax-free, and a product or category without a group falls back to the default. Check the default before your first sale.
Sales keep the tax they were charged
A changed rate, group or default applies to new sales only. Sales already made keep the tax they were charged, and the tax report reads them as they were.
Exempt customers need no reason at the till
Mark a customer Tax exempt, with a certificate number and an optional Valid until date, and their sales carry no tax without a reason being asked at the POS.
Settings opens from the gear in the header or your account menu, and swaps the sidebar for its own menu while you are in it. Each page has its own permission, and the settings belong to the whole business: someone limited to some branches can read them but not change them.
Business
General Settings (name, contact details, address, Store Currency, Default Language, Supported languages, Time zone, and Financial year and tax), Branding (logos, favicon, brand and chart colours, and the default appearance), Tax, Inventory and Accounting.
Branches & registers
Branches says what each branch does — Sell over a counter here, Hold stock here, Take returns here — with its receipt lines, default tax group and time zone. Registers lists each till's name, code, receipt prefix, receipt printer and cash drawer.
Selling at the till
Point of sale covers the drawer, discounts, selling past zero, locking and the offline window, sending receipts, quick keys, sounds, notes and coins, blind close, floats and the salesperson on each sale. Payments sets the ways to pay, cash rounding, deposits and how long store credit lasts.
Receipts, programmes and numbers
Receipt sets the paper width (58 mm or 80 mm), logo, header, footer and tax lines, and Invoice templates designs the till's receipt and the A4 sale invoice. Loyalty and Gift cards run their programmes, and Numbering sets each document's prefix and digits.
Communication
Email sends through your own mail server, with a log of what went out. SMS (Twilio) sends texts through Twilio or Another provider (HTTP) once a test message has gone through. Notifications decides who hears of what. Marketing sets the limits every offer obeys, such as quiet hours and a daily SMS limit, and switches Coupons on.
Security
Security & Access Control: Offer two-factor sign-in, how long sessions last, failed sign-ins and lockouts, password rules, rate limits, Unlock an account, and Password reset by text message.
Advanced
Storage Settings chooses where uploaded files are kept. Maintenance Mode shows a message while you work, lets listed IP addresses through, and shows whether the background jobs are running.
Some choices lock once the books hold data
The currency can no longer change once the books hold a journal, and the time zone cannot change while a month is closed. Changing the currency relabels prices; it never converts them.
The menu marks unfinished pages
A page with changes not yet saved is marked Unsaved, and leaving it asks first. Needs attention marks something switched on without what it needs, such as email without a login, or Maintenance Mode left on.
Search instead of scrolling
Type in Search settings at the top of the menu to find a page by name, and Back to Dashboard returns you to the main menu.
The bell in the header collects what Posify tells you: stock running low, bills falling due, registers left open, offline sales to review and more. Settings → Notifications decides who hears of what, and whether in the bell, by email or by text message.
- 1
Open the bell
The bell shows All, Unread and Archived tabs and Mark all as read; each notification opens what it is about and can be archived or deleted. New ones arrive while the page is open and pop up briefly, and See all opens the full list, filtered by kind.
- 2
Know what you are told about
Low stock and items running out, sales below zero, batches expiring, late purchase orders, supplier bills due, customers' old dues, registers left open, offline sales needing review, repeating expenses recorded, store credit expiring, stock requests between branches, and background jobs that stopped.
- 3
Choose who hears what
Settings → Notifications → For the team lists each event with In app, Email and Text. Each goes to the people whose role covers it, at their own branches, and a text goes to the mobile number on their profile.
- 4
Set the timing
Daily digests from sets the hour the daily checks go out, on the business's clock. Registers closed by, Supplier bills due within, Remind about dues older than, Remind again every, Store credit expiring within and Batches expiring within tune the rest.
- 5
Tell customers too
For customers holds Due reminder and Store credit expiring, sent to the customer's own email or phone in the business's language. They stay off until you switch them on.
- 6
Get alerts as texts
Save your number under Text alerts on your profile. Texts go out only once SMS is switched on in Settings → SMS (Twilio) and a test message has been sent.
Email needs your mail server
Password resets, emailed receipts, statements and alerts all go out through the mail server set in Settings → Email. With email switched off, the app sends no email at all.
Digests need the background jobs
Daily digests, reminders and retried emails and texts are sent by scheduled background jobs. When one stops, the people who may change the Maintenance Mode settings are told in the bell.
Install Posify as an app
Chrome and Edge show Install app in the header once the business has a logo or favicon in Settings → Branding, and Safari installs from its Share menu. The installed app works just like the browser tab.
A few shortcuts and habits that save time at the counter and in the back office. The function keys belong to the till; the rest work across the app.
⌘K jumps to any page
Cmd/Ctrl + K opens the page search from anywhere. It finds pages, not records, so use a list's own search box for a sale, a product or a customer.
Cmd/Ctrl + B makes room
Collapse the sidebar to an icon rail when a wide table needs the space, and hover a group's icon for its pages.
Learn the till keys
F2 customer, F3 discount, F4 hold or resume, F8 scan field, F9 take payment, / product search, Alt + C calculator, ? the full list, and Esc closes a dialog.
Scan from anywhere on the till
A scanner needs no click in the search box first. With a dialog open, the till refuses the scan and asks you to close the dialog, so a payment is never changed halfway.
Switch cashiers with a PIN
Each person sets a register PIN on their profile; a colleague takes over the till with theirs instead of signing anyone out, and a manager approves with theirs.
Filter, then export
Exports download every row the list's filters select, not just the page on screen, so narrow the list first.
Print without the frame
Printing any page leaves out the sidebar and the header, so a sale or a statement prints as a clean document.
Come back to your filters
Open a sale from a filtered list, then use the header's back arrow: the list comes back with its filters as you left them.
The till lists its own keys
Press ? anywhere on the till, or the keyboard button beside its search, to open Keyboard shortcuts with every key it knows. A barcode scanner needs no shortcut at all.